🛡️ Mod-ISO
🔰 Easy
Simple to use and embed in your design
🎨 Interference
Prevents probes from interfering with each other when in the same solution
↔️ Voltage
- 3.0-5.5-volt input
- nregulated 3.3-volt output
🤏 Small
Small footprint for a compact design
🔌 Power
- 66-mW power output at 3-volt input
- 100-mW power output at 5-volt input
Other stuff you'll need
This is just the module. You could...
- Use it in a breadboard. To do that, you'll need to connect the I2C bus and probe connections using point-to-point wiring or something similar.
- Use it in a Carrier Board for an easier-to-use solution than breadboards.
- Use it on a custom board and attach it either by pins or castellation.